Installing and Removing Gamma Zulu Keycaps

These instructions apply to the following models:

• 5Q
• X50Q
• 5QS

Please view this video for instructions on how to replace Gamma Zulu keycaps.

REMOVING THE KEYCAPS

• Place the key puller on top of the switch and press down until it latches onto the bottom of the keycap. Pull straight up, and voila! The keycap is removed.

• Do not pull the keycap off the switch at an angle. When the keycap is seated, its prongs are inserted into the switch itself, so removing the keycap at an angle can break the prong inside the keycap. Always remove the keycap by pulling it straight up from the switch.

REPLACING THE KEYCAPS

• Simply place the keycap back on top of the switch and press down until it is seated.